Request a quote | FTN GeoTech

Soil 5 tests

K Value Test The K Value Test determines the subgrade reaction value of the soil, which is essential for pavement and foundation design. At your site
₹15,000per point
Points
Plate Load Test The Plate Load Test provides crucial information about the soil's bearing capacity, expected settlement, and degree of compaction At your site
₹15,000per point
Points
Sand Replacement Test of Soil The Sand Replacement Test is used to determine the in-situ density of granular soils, especially where the Core Cutter Test is not suitable. It helps assess compaction by comparing with the soil's optimum moisture content (OMC) and maximum dry density (MDD), typically obtained from a Proctor Test Lab or site
₹1,500per point
Points
Soil Core Cutter Test The Soil Core Cutter Test is specifically used to assess soil compaction by determining its in-situ density, along with the optimum moisture content and maximum dry density. Lab or site
₹1,500per point
Points
Soil Test A soil test, including necessary investigations, will provide information about the soil profile, groundwater conditions at foundation depth, depth of refusal, potential settlement, and the safe bearing capacity of the soil. Lab or site
₹10,000per point
Points

Concrete Cube Test The Concrete Cube Test is conducted to determine the compressive strength of concrete, ensuring it meets the required design specifications. In our lab
₹400per set
Sets
Half-Cell Potential Test The Half-Cell Potential Test is a non-destructive method used to assess the likelihood of corrosion in embedded steel reinforcement by measuring the electrochemical potential on the concrete surface. At your site
₹5,000per point
Points
Paver Block Test Paver block tests assess compressive strength and water absorption to ensure durability and quality as per standards. In our lab
₹1,500per set
Sets
Rebar Scanning Test The Rebar Scanning Test is a non-destructive method used to detect the position, depth, and spacing of reinforcement bars (rebars) in concrete structures, and can also estimate bar diameter and cover depth. At your site
₹5,000per point
Points
Rebound Hammer Test The Rebound Hammer Test is a non-destructive method used to assess the surface hardness and estimate the compressive strength of concrete in existing structures. At your site
₹5,000per point
Points
Ultrasonic Pulse Velocity The UPV (Ultrasonic Pulse Velocity) Test is a non-destructive method used to assess the quality, uniformity, and strength of concrete by measuring the velocity of ultrasonic pulses through the material. At your site
₹5,000per point
Points

Brick Test Brick tests provide information on compressive strength, water absorption, efflorescence, and dimensional accuracy of the bricks In our lab
₹6,000per set
Sets

Chemical Steel Test Chemical testing of steel determines the content of elements such as carbon, manganese, phosphorus, sulphur, copper, and nickel — essential for verifying composition and compliance with material specifications. In our lab
₹20,000per piece
Pieces
Physical Steel Test Steel tests include tensile strength, bend and rebend tests, yield strength, and elongation percentage — all critical for assessing the mechanical properties and ductility of reinforcement bars. In our lab
₹20,000per piece
Pieces

Coarse Aggregate Test Coarse aggregate tests include sieve analysis, specific gravity and water absorption, crushing value, impact value, elongation and flakiness index, and bulk density — all of which are essential for assessing the suitability and strength of aggregates in construction. In our lab
₹6,000per set
Sets
Fine Aggregate Test (Sand) Sand tests include silt content, bulk density, sieve analysis, specific gravity, and water absorption — all crucial for evaluating the quality of fine aggregates used in construction. In our lab
₹5,000per set
Sets

Cement Test Cement tests include compressive strength, fineness, standard consistency, initial and final setting time, and soundness — all vital for ensuring the quality and performance of cement in construction. In our lab
₹10,000per set
Sets

Bitumen Test Bitumen tests include penetration, softening point, ductility, absolute viscosity, specific gravity, bitumen content, and Marshall stability — all essential for evaluating the performance and suitability of bituminous materials in road construction. In our lab
₹20,000per set
Sets

ACC Block Test AAC block tests include compressive strength, dimensional accuracy, and water absorption — essential for evaluating structural integrity and quality of the blocks. In our lab
₹10,000per set
Sets

Fly Ash Test Fly ash tests include specific gravity, moisture content, soundness, and fineness — important parameters to ensure its suitability as a cementitious material in concrete. In our lab
₹10,000per set
Sets

Drinking Water Test Drinking water tests include Total Dissolved Solids (TDS), Total Suspended Solids (TSS), pH value, and silica content — crucial for evaluating water quality and ensuring it meets safety standards. In our lab
₹5,000per set
Sets
Ground Water Test The Ground Water Test determines the depth of groundwater, size and type of aquifer, and other hydrogeological conditions essential for water extraction and foundation planning. At your site
₹20,000per point
Points
Waste Water Test Wastewater tests include Total Dissolved Solids (TDS), Total Suspended Solids (TSS), pH value, and chloride content — essential for assessing water quality and environmental compliance. In our lab
₹5,000per set
Sets

Earth Resistivity Test The Earth Resistivity Test measures the soil's ability to conduct electricity, helping determine the optimal location and design for grounding systems in electrical installations. At your site
₹10,000per point
Points
Topographical Land Survey A Topographical Land Survey maps the natural and man-made features of a site — including contours, elevations, trees, buildings, roads, and drainage — to assist in planning, design, and construction. At your site
₹2,500per are
Ares